Cisco ESW 500 Administration Manual page 326

Configuring Quality of Service
Defining Advanced QoS Mode
STEP 1
STEP 2
STEP 3
ESW 500 Series Switches Administration Guide
Click Quality of Service > Advanced Mode > DSCP Mapping. The
Page
opens:
DSCP Mapping Page
DSCP Mapping Page
The
•
DSCP In — Indicates the DSCP value in the incoming packet which will be
mapped to an outgoing packet.
•
DSCP Out — Sets a mapped DSCP value in the outgoing packet for the
corresponding incoming packet.
Define the relevant mapping.
Click Apply. DSCP incoming values are mapped to DSCP outgoing values, and the
device is updated.
contains the following fields:
12
DSCP Mapping
315