Defining Protocol Groups - Cisco ESW 500 Administration Manual

Configuring VLANs

Defining Protocol Groups

Defining Protocol Groups
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
Protocol Group Page
The
names and the VLAN Ethernet type. Interfaces can be classified as a specific
protocol based interface.
Click VLAN & Port Settings > VLAN Management > Protocol Group. The
Group Page
opens:
Protocol Group Page
Protocol Group Page
The
•
Frame Type — Displays the packet type.
•
Protocol Value — Displays the User-defined protocol name.
•
Group ID (Hex) — Defines the Protocol group ID to which the interface is
added. Range is 1-2147483647.
Click the Add Button. The
contains information which describes the protocol
contains the following fields:
Add Protocol Group Page
Protocol
opens:
7
225