Resetting Gvrp Statistics Counters; Viewing Eap Statistics - Cisco ESW 500 Administration Manual

Viewing Statistics
Viewing Ethernet Statistics
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
-
30 Sec
— Indicates that the GVRP statistics are refreshed every 30
seconds.
-
60 Sec
— Indicates that the GVRP statistics are refreshed every 60
seconds.
-
No Refresh
The GVRP Received Transmitted Table contains the following fields:
•
Join Empty — Displays the device GVRP Join Empty statistics.
•
Empty — Displays the device GVRP Empty statistics.
•
Leave Empty — Displays the device GVRP Leave Empty statistics.
•
Join In — Displays the device GVRP Join In statistics.
•
Leave In — Displays the device GVRP Leave in statistics.
•
Leave All — Displays the device GVRP Leave all statistics.
The GVRP Error Statistics Table contains the following fields:
•
Invalid Protocol ID — Displays the device GVRP Invalid Protocol ID statistics.
•
Invalid Attribute Type — Displays the device GVRP Invalid Attribute ID
statistics.
•
Invalid Attribute Value — Displays the device GVRP Invalid Attribute Value
statistics.
•
Invalid Attribute Length — Displays the device GVRP Invalid Attribute Length
statistics.
•
Invalid Event — Displays the device GVRP Invalid Events statistics.

Resetting GVRP Statistics Counters

Click Statistics > Ethernet > GVRP. The
Click Clear Counters. The GVRP statistics counters are cleared.

Viewing EAP Statistics

EAP Page
The contains information about EAP packets received on a specific
port.
— Indicates that the GVRP statistics are not refreshed.
GVRP Page
opens.
17
392