Cisco ESW 500 Administration Manual page 383

Managing Power-over-Ethernet Devices
Defining PoE Settings
STEP 1
ESW 500 Series Switches Administration Guide
Click VLAN & Port Settings > Port Management > PoE Settings. The
Page
opens:
PoE Settings Page
PoE Settings Page
The
the following information:
•
Total PoE Power Consumption (W) — Displays the total amount of power
consumed by PoE ports.
•
Total PoE Power Available (W) — Displays the total amount of power available
to PoE ports.
•
Port — Displays the selected port number.
•
Admin Status — Indicates whether PoE is enabled or disabled on the port. The
possible values are:
-
Enable
— Enables PoE on the port. This is the default setting.
-
Disable
— Disables PoE on the port.
displays the currently configured PoE ports and contains
15
PoE Settings
372