Modifying Gvrp Settings - Cisco ESW 500 Administration Manual

Configuring VLANs
Defining GVRP Settings
STEP 2
STEP 3
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
•
GVRP State — Indicates if GVRP is enabled on the interface. The possible field
values are:
-
Enabled
— Enables GVRP on the selected interface.
-
Disabled
— Disables GVRP on the selected interface.
•
Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on
the interface. The possible field values are:
-
Enabled
— Enables Dynamic VLAN creation on the interface.
-
Disabled
— Disables Dynamic VLAN creation on the interface.
•
GVRP Registration — Indicates if VLAN registration through GVRP is enabled
on the device. The possible field values are:
-
Enabled
— Enables GVRP registration on the device.
-
Disabled
— Disables GVRP registration on the device.
Define the relevant fields.
Click Apply. The GVRP Settings are defined, and the device is updated.

Modifying GVRP Settings

Click VLAN & Port Settings > VLAN Management > GVRP Settings. The
Settings Page
opens:
Click the Edit button. The
Edit GVRP Page
opens:
7
GVRP
223