Configuring Quality of Service
Defining General Settings
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide
•
Restore Defaults — Restores the factory CoS default settings to the selected
port.
-
Checked
— Restores the factory QoS default settings to ports after
clicking the Apply button.
-
Unchecked
Define the relevant fields.
Click Apply. The QoS Mode is defined, and the device is updated.
Modifying Interface Priorities
Click Quality of Service > General > CoS. The
Click the Edit button. The
Edit Interface Priority Page
Edit Interface Priority Page
The
•
Interface — Indicates whether the interface is a port or EtherChannel.
•
Set Default User Priority — Defines the default CoS value for incoming packets
for which a VLAN tag is not defined. The possible field values are 0-7. The
default CoS is 0.
Modify the Interface priority.
Click Apply. The Interface priority is set, and the device is updated.
— Maintains the current QoS settings.
Edit Interface Priority Page
contains the following fields:
CoS Page
opens:
opens:
12
301