Modifying Protocol Groups - Cisco ESW 500 Administration Manual

Configuring VLANs
Defining Protocol Groups
STEP 3
STEP 4
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
Add Protocol Group Page
Add Protocol Group Page
The
protocol groups. The
•
Frame Type — Displays the packet type.
•
Protocol Value — Defines the User-defined protocol value. The options are as
follows:
-
Protocol Value
-
Ethernet-Based Protocol Value
format.
•
Group ID — Defines the Protocol group ID to which the interface is added. The
possible value range is 1-2147483647 in hexadecimal format.
Define the relevant fields.
Click Apply. The Protocol Group is added, and the device is updated.

Modifying Protocol Groups

Edit Protocol Group Page
The
protocol groups
Click VLAN & Port Settings > VLAN Management > Protocol Group. The
Group Page
opens:
Click the Edit Button. The
provides information for configuring new VLAN
Add Protocol Group Page
— The possible values are IP, IPX, or ARP.
— Specify the value in hexadecimal
provides information for configuring existing VLAN
Edit Protocol Group Page
contains the following fields.
opens:
7
Protocol
226