Configuring Quality of Service
Defining QoS Basic Mode
STEP 3
STEP 4
Defining QoS Basic Mode
STEP 1
ESW 500 Series Switches Administration Guide
•
Interface — Displays the interface to which the entry refers.
•
Policy Name — Displays the Policy name associated with the interface.
Define the relevant fields.
Click Apply. The QoS policy binding is modified, and the device is updated.
Basic Mode Page
The
Packets entering a QoS domain are classified at the edge of the QoS domain.
To define the Trust configuration:
Click Quality of Service > Basic Mode. The
Basic Mode Page
Basic Mode Page
The
contains information for enabling Trust on the device.
contains the following fields:
Basic Mode Page
opens:
12
329