Configuring Device Security
Defining 802. 1 x
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide
-
Discard
— Discards the packets. This is the default value.
-
Shut Down
remains shut down until reactivated, or until the device is reset.
•
Enable Traps — Indicates if traps are enabled for Multiple Hosts. The possible
field values are:
-
Checked
— Indicates that traps are enabled for Multiple hosts.
-
Unchecked
•
Trap Frequency — Defines the time period by which traps are sent to the host.
The Trap Frequency (1-1000000) field can be defined only if multiple hosts are
disabled. The default is 10 seconds.
Modify the relevant fields.
Click Apply. The authentication settings are defined, and the device is updated.
Authenticated Hosts
Authenticated Hosts Page
The
— Discards the packets and shuts down the port. The ports
— Indicates that traps are disabled for Multiple hosts.
contains a list of authenticated users.
5
147