Configuring Vlan Rate Limit - Cisco ESW 500 Administration Manual

Configuring Quality of Service
Defining General Settings
STEP 4
STEP 5
STEP 1
ESW 500 Series Switches Administration Guide
For FE ports, the rate is 62 - 100,000 Kbps.
For GE ports, the rate is 62 - 1,000,000 Kbps.
Modify the relevant fields.
Click Apply. The bandwidth settings are modified, and the device is updated.

Configuring VLAN Rate Limit

Rate limiting per VLAN allows network administrators to limit traffic on VLANs.
Rate limiting is calculated separately for each packet processor in a unit. QoS rate
limiting has priority over VLAN rate limiting. For example, if a packet is subject to
QoS rate limits but is also subject to VLAN rate limiting, and the rate limits conflict,
the QoS rate limits take precedence.
To define the VLAN Rate Limit:
Click Quality of Service > General > VLAN Rate Limit. The
opens:
VLAN Rate Limit Page
VLAN Rate Limit Page
The contains the following fields:
12
VLAN Rate Limit Page
311