Configuring Bandwidth - Cisco ESW 500 Administration Manual

Configuring Quality of Service
Defining General Settings
STEP 1
ESW 500 Series Switches Administration Guide

Configuring Bandwidth

Bandwidth Page
The
for specified egress and ingress interfaces.
Rate Limits and Shaping are defined per interface:
•
Rate Limit sets the maximum bandwidth allowed on ingress interfaces.
•
Shaping Rate sets the maximum bandwidth allowed on egress interfaces. On
GE ports, traffic shape for burst traffic (CbS) can also be defined.
Click Quality of Service > General > Bandwidth. The
Bandwidth Page
The Bandwidth Page
•
Ports — Indicates that the bandwidth settings of the ports are described in the
page.
•
EtherChannels — Indicates that the bandwidth settings of the EtherChannels
are described in the page.
•
Interface — Displays the interface (port or EtherChannel) for which the
Bandwidth settings are made.
allows network managers to define the bandwidth settings
contains the following fields:
12
Bandwidth Page
opens:
308