Default Parameters - Cisco ESW 500 Administration Manual

Configuring IP Information
Domain Name System
STEP 1
ESW 500 Series Switches Administration Guide
Click Monitor & Device Properties > System Management > Domain Name System
(DNS) > DNS Servers. The
DNS Servers Page
DNS Servers Page
The
•
Enable DNS — Enables translating the DNS names into IP addresses. The
possible field values are:
-
Checked — Translates the domains into IP addresses.
-
Unchecked

Default Parameters

•
Default Domain Name — Specifies the user-defined DNS server name (1 -158
characters).
•
Type — Displays the IP address type. The possible field values are:
-
DHCP
— The IP address is dynamically created.
-
Static
— The IP address is a static IP address.
•
Remove — Removes DNS servers. The possible field values are:
DNS Servers Page
contains the following fields.
— Disables translating domains into IP addresses.
opens:
8
241