Configuring Spanning Tree
Defining Multiple Spanning Tree
STEP 1
ESW 500 Series Switches Administration Guide
Defining MSTP Instance Settings
MSTP maps VLANs into STP instances. Packets assigned to various VLANs are
transmitted along different paths within
Regions). Regions are one or more Multiple Spanning Tree bridges by which
frames can be transmitted. In configuring MSTP, the MST region to which the
device belongs is defined. A configuration consists of the name, revision, and
region to which the device belongs.
Network Administrators can define MSTP Instances settings using the
Instance Settings Page
Click VLAN & Port Settings > Spanning Tree (STP) > MSTP > Instance Settings.
MSTP Instance Settings Page
The
MSTP Instance Settings Page
MSTP Instance Settings Page
The
•
Instance ID — Lists the MSTP instances configured on the device.
•
Included VLAN — Maps the selected VLAN to the selected instance. Each
VLAN belongs to one instance.
•
Bridge Priority — Specifies the selected spanning tree instance device priority.
The field range is 0-61440.
Multiple Spanning Tree Regions
.
opens:
contains the following fields:
11
(MST
MSTP
282