Modifying Multicast Forwarding - Cisco ESW 500 Administration Manual

Configuring Multicast Forwarding
Defining Multicast Forwarding
STEP 2
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide
-
Dynamic
— Attaches the port to the Multicast group as dynamic
member.

Modifying Multicast Forwarding

Click VLAN & Port Settings > Multicast > Forward. The
opens:
Click the Edit button. The
Edit Multicast Forward All Page
Edit Multicast Forward All Page
The
•
VLAN ID — Displays the VLAN ID.
•
Interface — Displays the port or EtherChannel attached to the Multicast Group.
•
Interface Status — Displays the interface status of the port or EtherChannel.
The options are as follows:
-
Static
— Attaches the interface to the Multicast group as a static
member.
-
Forbidden
even if IGMP snooping designated the interface to join a Multicast group.
-
Excluded
— The interface is not part of a Multicast group.
-
Dynamic
— Attaches the interface or EtherChannel dynamically to the
Multicast group.
Define the relevant fields.
Edit Multicast Forward All Page
contains the following fields:
— Forbidden interfaces are not included the Multicast group,
10
Multicast Forward Page
opens:
260