Modifying Arp Settings - Cisco ESW 500 Administration Manual

Configuring IP Information
Managing ARP
STEP 1
STEP 2
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide

Modifying ARP Settings

Click Monitor & Device Properties > System Management > IP Addressing > ARP.
The ARP Page opens:
Click the Edit button. The
Edit ARP Page
Edit ARP Page
The contains the following fields:
•
VLAN — Indicates the ARP-enabled interface.
•
IP Address — Indicates the station IP address, which is associated with the
MAC address filled in below.
•
MAC Address — Indicates the station MAC address, which is associated in the
ARP table with the IP address.
•
Status — Defines the ARP Table entry status. Possible field values are:
-
Dynamic
— Indicates the ARP entry is learned dynamically.
-
Static
— Indicates the ARP entry is a static entry.
Define the relevant fields.
Click Apply. The ARP Settings are modified, and the device is updated.
Edit ARP Page
opens:
8
239