Static Arp Inspection Table - Cisco ESW 500 Administration Manual

Configuring Device Security
Defining Dynamic ARP Inspection
STEP 1
NOTE
STEP 2
ESW 500 Series Switches Administration Guide
Click Security > ARP Inspection > ARP Inspection List. The
Page
opens:
ARP Inspection List Page
ARP Inspection List Page
The
•
ARP Inspection List Name — Pull-down lists name of the Inspection List.
•
Delete and Add Buttons — Delete or Add user-defined ARP Inspection Lists.

Static ARP Inspection Table

•
IP Address — Specifies IP address included in ARP Binding Lists which is
checked against ARP requests and replies.
•
MAC Address — Specifies MAC address included in ARP Binding Lists which
is checked against ARP requests and replies.
The Binding list cannot be added until an ARP list is added.
Click Add under ARP Inspection List Name. The
contains the following fields:
Add ARP list Page
5
ARP Inspection List
opens:
197