Introduction; Figure 38: Gs970Emx/28 Switch Installed In A Standard 19-Inch Equipment Rack - Allied Telesis CentreCOM GS970EMX Series Installation Manual

Chapter 5: Installing the GS970EMX/28 Switch in an Equipment Rack

Introduction

72
The GS970EMX/28 Switch comes with two brackets for installing the
device in a standard 19-inch equipment rack. Refer to Figure 38. The
brackets and screws are shown in Figure 15 on page 47.
Figure 38. GS970EMX/28 Switch Installed in a Standard 19-inch
Note
You can install the GS970EMX/28 Switch in an equipment rack with
the brackets that come with the device or with the RKMT-J13
equipment rack brackets kit, which is sold separately.
Equipment Rack