Installing Gs970Emx/20 And Gs970Emx/28 Switches On A Wooden Wall; Plywood Base For A Wall With Wooden Studs; Figure 51: Gs970Emx Switch On A Wall With A Plywood Base - Allied Telesis CentreCOM GS970EMX Series Installation Manual

Chapter 7: Installing GS970EMX/20 and GS970EMX/28 Switches on a Wall
Installing GS970EMX/20 and GS970EMX/28 Switches on a Wooden
Wall
Plywood Base for
a Wall with
Wooden Studs
88
This section contains the procedures for installing the switch on a wooden
wall.
When installing the switch on a wall that has wooden studs, Allied Telesis
recommends installing the device on a plywood base. (A plywood base is
not required for concrete walls.) Refer to Figure 51.
Wall Studs
Wall
Plywood Base
Figure 51. GS970EMX Switch on a Wall with a Plywood Base