1/10Gbps Sfp+ Port Leds; Figure 7: Speed/Activity Leds For The 1/10Gbps Sfp+ Ports - Allied Telesis CentreCOM GS970EMX Series Installation Manual

1/10Gbps SFP+
Port LEDs
Table 5. Speed/Activity LEDs for the 1/2.5/5/10Gbps Multi-Gigabit Copper
State
Off
The1/10Gbps SFP+ ports have one LED that displays speed/activity
information. Refer to Figure 7.
GS970EMX/10 Switch
Figure 7. Speed/Activity LEDs for the 1/10Gbps SFP+ Ports
Table 6 describes the LED.
Table 6. Speed/Activity LEDs for the 1/10Gbps SFP+ Ports
State
Solid Amber
Flashing Amber
Solid Green
Flashing Green
Off
CentreCOM GS970EMX Series Installation Guide for Standalone Switches
Ports (Continued)
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
GS970EMX/20 and GS970EMX/28
The port has established a link at 1Gbps
to a network device.
The port is transmitting or receiving data
at 1Gbps.
The port has established a link at 10Gbps
to a network device.
The port is transmitting or receiving data
at 10Gbps.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
Description
Switches
Description
31