Table of Contents
Advertisement
Hardware Options
RKMT-J05
Equipment Rack
Brackets Kit
Eight M3x6mm truss
head screws
BRKT-J23 Wall
Brackets Kit
The following hardware options are sold separately.
Installing the GS970EMX/10 Switch in a standard 19-inch equipment rack
requires the RKMT-J05 brackets kit. Refer to Figure 19. For instructions,
refer to Chapter 3, "Installing the GS970EMX/10 Switch in an Equipment
Rack" on page 57.
Two handles
Two long brackets
Eight M4x6mm truss
Figure 19. RKMT-J05 Equipment Rack Brackets Kit for the GS970EMX/10
The GS970EMX/10 Switch is installed on a wall with the BRKT-J23 wall
brackets kit. Refer to Figure 20. For instructions, refer to Chapter 6,
"Installing the GS970EMX/10 Switch on a Wall" on page 75.
Figure 20. BRKT-J23 Wall Brackets Kit for the GS970EMX/10 Switch
CentreCOM GS970EMX Series Installation Guide for Standalone Switches
head screws
Switch
Two short brackets
Two cable trays
Ten Tie Wraps
51
Advertisement
Table of Contents
Need help?
Do you have a question about the CentreCOM GS970EMX Series and is the answer not in the manual?
Questions and answers