Innovative Technology Spectral NV200 User Manual page 70

User Manual NV200 Spectral Range
<< Back to Contents
Compressed air (Max pressure = 5 bar) should be used to clean the rollers and ticket
path of debris. The ticket path can then be wiped off with a soft lint free cloth, this can
be dampened (NOT wet) as required.
The printer should be opened so the cutter can have debris removed.
Pushing back on the white lever will pop the printer platen out of position.
Both the Printer body and the platen (the removed part) can be wiped off with a
dampened (NOT wet) soft lint free cloth.
The Platen is reattached by pushing it back into position.
The detached plastic for the note path can be repositioned by aligning the plastic
guides and pushing the nodules into position.
The Ticket Path can then be closed, and the unit can be powered.
Copyright © Innovative Technology Ltd 2019
Doc: GA02119 User Manual NV200 Spectral Range
Version: 2.2
Page 69 of 113