Bleeding And Filling The Damper - Husqvarna 701 Enduro 2017 Repair Manual

9 SHOCK ABSORBER, SWINGARM
62
Mount locking cap of the damper cartridge.
Bleed and fill the damper. (© p. 62)
Fill the damper with nitrogen. (K1 p. 65) ©
i -
fj
% i
201275-10
Alternative 1
O
Turn adjusting screw © clockwise with a screwdriver up to the last percepti­
ble click.
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
©
© I-.
Compression damping, low-speed
Standard 15 clicks
201287-10
Turn adjusting screw © all the way clockwise using a socket wrench.
Turn counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline
Compression damping, high-speed
Standard 1.5 turns
Turn adjusting screw
©
clockwise up to the last perceptible click.
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Standard 15 clicks
Alternative 2
Warning
Danger of accident Modifications to the suspension setting may
seriously alter the handling characteristic.
Extreme modifications to the suspension setting may cause a serious
deterioration in the handling characteristic and overload components.
- Only make adjustments within the recommended range.
- Ride slowly to start with after making adjustments to get the feel of
the new handling characteristic.
A
- Turn adjusting screws ©, © and © to the position determined during dis­
assembly.
Finishing work
- Install the spring. (US p. 66)
Bleeding and filling the damper 9.21
Info
Before working with the vacuum pump, be sure to read the operating instructions carefully.
Completely open the adjusters of the rebound and compression damping.
I