Table of Contents
Advertisement
17
ENGINE
O
-
Check needle bearings
If there is damage or wear:
-
Change the needle bearings.
-
Check the pivot points of main shaft
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the tooth profiles of main shaft
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the pivot points of idler gears
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the shift dogs of idler gears
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth faces of idler gears
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth profiles of sliding gears
If there is damage or wear:
-
Change the gear wheel pair.
0
-
Check sliding gears
for smooth operation in the profile of main shaft
If the sliding gear does not move freely:
-
Change the sliding gear or the main shaft.
0
-
Check sliding gears
for smooth operation in the profile of countershaft
If the sliding gear does not move freely:
-
Change the sliding gear or the countershaft.
-
Check stop disks @ for damage and wear.
If there is damage or wear:
-
Change the stop disks.
C,
-
Use new lock rings
with every repair.
17.4.39
Assembling the main shaft
Info
Use new lock rings with every repair.
for damage and wear.
8
and countershaft
8
and countershaft
8
for damage and wear.
8
and sliding gears
8,
@)
sliding gears
0
for damage and wear.
306561-10
@)
for damage and wear.
8
for damage and wear.
@)
for damage and wear.
C)
and fixed gear
for damage and wear.
8.
C,.
163
Advertisement
Table of Contents
