Video-Analytics; Video-Analytics_Motion - Idis DR-2516P Operation Manual

Part 2 - Configuration
Ignoring interval setting does not affect the
motion detection recording.
– Use Ignoring Time: Select Time Setup to specify
the PIR detection ignore time of camera channels.
PIR detection will be disabled during the specified
time frame.
● Actions: Specify which actions to take when a PIR
event occurs.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
– Notify: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
68

Video-Analytics

Event lists that occur through video analysis include
Motion, Tampering, TripZone, Auto Tracking.

Video-Analytics_Motion

● No.: Select which cameras to apply Motion Detection
to.
● Zone: Define the motion detection block.
Use the remote control's arrow buttons to move the
block selection window up, down, left, and right. The
selection window consists of 8 blocks per row. Select/
deselect individual blocks using the Camera buttons.
You can use the mouse to drag the zone and then select,
clear, or reverse the selection.
From the zone selection screen, press the button