Stream I - Idis DR-2516P Operation Manual

Part 2 - Configuration

Stream I

Configure the camera's live and recording resolution,
codec, picture quality, transfer speed, and ips speed
settings.
● Camera Channels: It's possible to configure a unique
video profile for each camera.
● Bitrate Status: Display the highest value of stream.
Click the Setup button to change the allocation for
each channel. For more information on bitrate, refer
to Camera View Buttons on page 17.
●
: Apply the video profile settings of the camera
selected under Camera Channel to a different camera.
● Live/Remote Video Profile: Check the current Live
video picture quality and edit remote video profile
settings.
● Record Video Profile: Set up 4 recording quality
profiles.
54
● Video Profile: Select Stream 1, Stream 2, Stream 3,
or Custom (available from Record Video Profile only).
– Codec: Supports H.264 and H.265.
– Resolution: Select a resolution supported by the
camera. Maximum available resolution is chosen
automatically based on the selected video profile.
– Quality: Assign different Quality settings to
different cameras.
– VBR/CBR: Select VBR or CBR. Transmitted data size
varies depending on the amount of movements in
the images with VBR but is fixed with CBR.
– ips: Select a value between 1 and 30. Maximum ips
is determined automatically based on the selected
video profile.
● Use Dual Track Recording: Set to record with the
video profile value (main stream) set in the schedule
and record with the profile 4 value (sub stream) at the
same time.
• It displays as below when recording on a network
video recorder.
– If the screen layout is less then 3x3, video
profile (main stream) is displayed and if it
is larger than 3x3, profile 4 (sub stream) is
displayed.
– If the channel is larger than 3x3 size on the
screen layout such as 1+7 and 1+12, the
video profile (main stream) is displayed first
but otherwise the profile 4 (sub stream) is
displayed first .
• This function is supported only for cameras
supporting dual recording function.