Replacing A Cpu Or Heat Sink - Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual

Supported CPUs
– Two CPUs: AMD EPYC™ 7002 series and 7003 series
– Two CPU sockets: AMD™Socket SP3
– Supported CPU up to 280 W TDP per 1 slot.
For the latest information on hardware options, see the hardware
configurator of your server, available online at the following address:
https://www.fujitsu.com/fts/products/computing/servers/primergy/
index.html
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
11.3

Replacing a CPU or heat sink

Field Replaceable Unit
(FRU)
Tools: T20 Torx screw driver
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
▶
Never push a CPU over a surface.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord (AC PSU)" on page
▶
"Getting access to the component" on page
▶
"Removing the top cover" on page
RX2450 M1
37.
43.
Upgrade and Maintenance Manual
Hardware: 20 minutes
Software: 5 minutes
37.
38.
39.
Processor (CPU)
169