Assembling The Autodecompressor - Husqvarna FE 450 2016 Repair Manual

·�
y
18.4.21

Assembling the autodecompressor

Pull autodecompression shaft
304674-10
Release and remove autodecompression spring
Info
Autodecompression weight
304675-10
Insert long flange
the hole, push the autodecompression spring over bearing
8
bolt and hook it into autodecompression weight
304675-11
Mount autodecompression shaft
304674-11
Mount new lock ring@).
Perform a function check.
The autodecompression spring does not turn the autode­
compression shaft back to the stop:
Pre-tension the autodecompression spring more or
replace it.
304673-11
8
out of the camshaft.
8
cannot be taken off.
O
of the autodecompression spring in
8
in the camshaft.
18 ENGINE
fD.
..
fD.
..
211