Table of Contents
Advertisement
19 CLUTCH
The fluid level rises with increasing wear of the clutch facing discs.
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
250
Checking/correcting the fluid level of the h draulic clutch
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and clutch lines are not
(FE EU/AU, FE 450/501 US)
-
Move the clutch fluid reservoir mounted on the handlebar
to a horizontal position.
O.
-
Remove screws
8
-
Remove cover
with membrane
-
Check the fluid level.
Fluid level below container
rim
If the fluid level does not meet specifications:
-
Correct the fluid level of the hydraulic clutch.
I Brake fluid DOT 4
-
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi
ately with water.
(FE 501 SUS)
-
Move the clutch fluid reservoir mounted on the handlebar
to a horizontal position.
O.
-
Remove screws
8
Remove cover
with membrane
-
Check the fluid level.
Fluid level below container
rim
If the fluid level does not meet specifications:
-
Correct the fluid level of the hydraulic clutch.
I Brake fluid DOT 4
-
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi
ately with water.
8.
4 mm (0.16 in)
(a
p. 348)
@).
4 mm (0.16 in)
(�
p. 348)
..
Advertisement
Table of Contents
