Husqvarna FE 450 2016 Repair Manual page 42

6 FORK, TRIPLE CLAMP
40
Info
The compression damping is located in left fork
leg (white adjusting screw). The rebound
COMP
damping is located in right fork leg REB (red adjusting
screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
clamp.
(FE EU/AU, FE 450/501 US)
- Tighten screws (3.
Guideline
Screw, bottom
triple clamp
(FE 501 SUS)
Tighten screws (3.
Guideline
Screw, bottom
triple clamp
C,.
- Tighten screw
Guideline
Screw, top steering
head
- Mount and tighten screw@.
Guideline
Screw, top MS
steering stem
MS 15 Nm (11.1 lbf ft)
MS 15 Nm (11.1 lbf ft)
M20x1.5 12 Nm (8.9 lbf ft)
17 Nm (12.5 lbf ft)
Loctite
®
243
™