Rear Wheel; Removing The Rear Wheel - Husqvarna FE 450 2016 Repair Manual

Rear wheel

14.8
14.8.1

Removing the rear wheel

C,.
-
Position spacing tube
8
-
Press in new bearing
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
-
Grease new shaft seal rings
they are flush.
Finishing work
-
Install the front wheel. (!:JI
Preparatory work
-
Raise the motorcycle with a lift stand.
Main work
(FE EU/ AU, FE 450/501 US)
-
Press the brake caliper onto the brake disc by hand in
order to push back the brake piston.
Info
Make sure when pushing back the brake piston
that you do not press the brake caliper against the
spokes.
O.
-
Remove nut
-
Remove chain adjuster@. Pull out wheel spindle
enough to allow the rear wheel to be pushed forward.
-
Push the rear wheel forward as far as possible. Remove
the chain from the rear sprocket.
Info
Cover the components to protect them against
damage.
all the way using a suitable tool.
8 O
and and press in until
p. 123)
(!:JI p. 14)
14 WHEELS
8
far
125