Removing The Torque Limiter; Removing The Starter Idler Gear; Removing The Shift Shaft; Removing The Shift Drum Locating Unit - Husqvarna FE 450 2016 Repair Manual

18 ENGINE
18.3.26
18.3.27
18.3.28
18.3.29
192

Removing the torque limiter

Removing the starter idler gear

Removing the shift shaft

Removing the shift drum locating unit

-
Remove the screw with the washer. Remove torque
0-
limiter
-
Remove the washer.
-
Remove the lock ring. Take off the washer. Take off starter
O.
idler gear
O
-
Push sliding plate away from the shift drum locating unit.
Remove shift shaft @ with the washer.
O.
-
Remove screw
-
Push away locking lever @ from shift drum locating unit
and remove the shift drum locating unit.
-
Relieve tension from the locking lever.
..
..
(D
..