Table of Contents
Advertisement
10 EXHAUST
90
(FE 450/501 US, FE 501 S US)
O
-
Remove screws
of connecting cap
-
Remove connecting cap with the perforated pipe, O-
CD.
ring
and glass fiber yarn filling
0
-
Remove screws
and silencer cap
@)
-
Remove screws
and insert Q) together with insulat-
ing pad�-
-
Remove the insulating pad from the insert.
-
Clean the parts that need to be reinstalled and check for
damage.
-
Mount the new insulating pad on the insert and fasten
with adhesive tape.
a..
-
Position the insert with the insulating pad in outer
tube
-
Mount and tighten screws
Guideline
Screws on the
main silencer
CD
-
Mount O-ring
on the silencer cap.
-
Fit the new glass fiber yarn filling onto the perforated
pipe.
-
Fit the connecting cap with the glass fiber yarn filling in
the outer tube.
Info
Press the glass fiber yarn filling into the outer tube
using a blunt tool.
-
Mount and tighten screws
Guideline
Screws on the
main silencer
-
Mount O-ring @ on the silencer cap.
-
Position the silencer cap with O-ring @ in the outer tube.
-
Mount and tighten screws
Guideline
Screws on the
main silencer
Finishing work
-
Install the main silencer.
-
Install the right side cover.
8.
e.
(D
with O-ring
@).
M5
7 Nm (5.2 lbf ft)
0-
M5
7 Nm (5.2 lbf ft)
0-
M5
7 Nm (5.2 lbf ft)
(�
p. 88)
(�
p. 97)
@.
..
Advertisement
Table of Contents
