Husqvarna FE 450 2016 Repair Manual page 144

15 WIRING HARNESS, BATTERY
142
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
-
Check that the power consumer is functioning properly.
-
Close the fuse box cover.
(FE 501 SUS)
-
Open fuse box cover
-
Remove the defective fuse.
Guideline
Fuse 1 - 10 A - EFI control unit
Fuse 2 - 10 A- fuel pump
Fuse 3 - 10 A - ignition
Fuse 4 - 10 A - high beam, low beam, parking light, tail
light, license plate lamp, horn, brake light, turn signal,
radiator fan
- 10 A - spare fuses
Fuses res
• Info
I
e.
You can recognize a faulty fuse by a burned-out
fuse wire
Warning
Fire hazard
cal system.
-
Only use fuses with the required ampere
value.
-
Do not bypass or repair fuses.
-
Use spare fuses with the correct rating only.
I
Fuse (75011088010)
• Tip
I
Replace the spare fuse in the fuse box so that it is
available if needed.
-
Check that the power consumer is functioning properly.
-
Close the fuse box cover.
Finishing work
-
Mount the seat. (l!,!I p. 98)
O.
Incorrect fuses overload the electri­
(l!,!I p. 278)
..