Husqvarna FE 450 2016 Repair Manual page 51

7 HANDLEBAR,CONTROLS
-
Move the handlebar to the straight-ahead position.
-
Push back sleeves (D.
C,.
-
Loosen nut Turn adjusting screw@) in as far as pos-
sible.
-
Loosen nut (D. Turn adjusting screw @ so that there is
f)
play in the throttle cable at the throttle grip.
Guideline
I Play in throttle cable
-
Tighten nut (D.
-
Press and hold the throttle grip in the closed setting. Turn
0
adjusting screw out until there is no play in throttle
cable (D.
C,.
-
Tighten nut
-
Slide on sleeves (D. Check the throttle grip for smooth
operation.
-
Position activated charcoal filter
Reconnect rubber band
Finishing work
-
Install the fuel tank. (� p. 101)
-
Mount the seat. (� p. 98)
-
Check the play in the throttle cable.(� p. 47)
I 3 ... 5 mm (0.12 ... 0.2 in)
8.
O.
49