Assembling The Piston Rod - Husqvarna FE 450 2016 Repair Manual

6 FORK, TRIPLE CLAMP
30
Assemblin the piston rod
Info
The steps are identical for both fork legs, except for the hydrostop needle and valve.
201790-10
R00033-10
R00031-10
(D
-
Mount washer and shim stack@.
Info
Note the setting list.
-
Mount sleeve fD.
-
Turn hydrostop unit and clamp sleeve fDwith special tool.
I Clamping stand (T1202S)
Tighten sleeve fD.
Guideline
Hydrostop unit
sleeve
-
Degrease the piston rod.
-
Clamp the piston rod with the special tool.
I Clamping stand (T14049S)
-
Grease O-ring. Mount valve needle
I Lubricant (T158) (a p. 350)
-
Mount spring@.
-
Mount and tighten adapter
Guideline
Adapter of piston
rod
-
Position the spring.
-
Mount compression shim stack 0 with the smaller shims
facing downward.
Info
Note the setting list.
(a p. 365)
M6x0.5 6 Nm (4.4 lbf ft)
(a p. 368)
O
in the piston rod.
e.
CD
with spring
M6x0.5 12 Nm (8.9 lbf ft)
..