Removing The Heim Joint - Husqvarna FE 450 2016 Repair Manual

9 SHOCK ABSORBER, SWINGARM
9.19
66
201404-10
Removin the heim joint
-
Check the piston rings for damage and wear.
If damage or a bronze-colored surface is visible:
-
Change the piston.
Condition
The shock absorber has been removed.
-
Clamp the shock absorber in the vise using soft jaws for pro­
tection.
Remove the collar bushing of the heim joint.
I Drift (T120) (� p. 364)
-
Turn the shock absorber and remove the second collar bush­
ing of the heim joint.
O
-
Remove seal rings on both sides.
-
Press the heim joint against a lock ring using the special tool.
I Pressing tool (T1207S)
-
Remove the second lock ring
6)
-
Place special tool underneath and press out heim
(D
joint with special tool G).
I Pressing tool (T1207S)
(ll!:!l p. 366)
8.
(� p. 366)
..
..