9 SHOCK ABSORBER, SWINGARM
80
Mount the chain.
-
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
Position the engine sprocket cover and mount in the holder.
Mount and tighten screws
Guideline
Screw, clutch slave
cylinder
Mount and tighten screws
Guideline
Remaining screws,
chassis
Position the brake caliper and pull it back.
Position the brake line in the guide.
Finishing work
Install the rear wheel.
(!el
Remove the motorcycle from the lift stand.
4D.
C,.
M6
10 Nm (7.4 lbf ft)
0.
M8
25 Nm (18.4 lbf ft)
p. 127)
(!el
p. 14)