Starting The Motorcycle To Check The Function - Husqvarna FE 450 2016 Repair Manual

Hide thumbs Also See for FE 450 2016:
Table of Contents

Advertisement

5.4

Starting the motorcycle to check the function

Danger
Danger of poisoning
death.
-
Always make sure there is sufficient ventilation when running the engine.
-
Use an effective exhaust extraction system when starting or running the engine in an enclosed
space.
-
Shift transmission to neutral.
(FE 501 SUS)
-
Turn the key in the ignition lock to the position 0.
-
Turn the emergency OFF switch to the position 0.
(FE AU)
-
Turn the emergency OFF switch to the position 0.
-
Press the electric starter button.
Info
Press the electric starter button for at most 5 seconds. Wait for a least 5 seconds before trying
again.
When starting Fl warning lamp lights up briefly as a function check.
Do not open the throttle.
-
Raise the motorcycle off of the stand and secure the stand
with the rubber band
-
Shift transmission to neutral.
(FE 501 SUS)
-
Turn the key in the ignition lock to the position 0.
-
Turn the emergency OFF switch to the position 0.
(FE AU)
-
Turn the emergency OFF switch to the position 0.
Condition
401944-11
Ambient temperature: < 20 °C (< 68 °F)
-
Pull the idle speed adjusting screw all the way out.
-
Press the electric starter button.
Info
Press the electric starter button for at most 5 seconds.
Wait for a least 5 seconds before trying again.
Warning lamp Fl lights up briefly as a functional con­
trol when starting.
400733-01
Exhaust gases are toxic and inhaling them may result in unconsciousness and
5 MOTORCYCLE
O.
..
15

Advertisement

Table of Contents
loading

Table of Contents