Husqvarna FE 450 2016 Repair Manual page 181

-
Mount and tighten screw
Guideline
Remaining screws,
chassis
-
Position the shock absorber.
-
Mount and tighten screw
Guideline
M10
Screw, top
shock absorber
-
Remove the locking piece and position the subframe.
Info
Watch out for the intake flange.
Mount and tighten screws G).
Guideline
MB
Screw, sub­
frame
-
Remove screw fl!).
-
Mount and tighten screw fl!).
Guideline
Screw, sub­ M8
frame
-
Repeat these steps on the opposite side.
-
Mount the vent hose.
G,.
-
Position hose clamp
41.
MB
25 Nm (18.4 lbf ft)
Gs,.
60 Nm (44.3 lbf ft)
®
Loctite
35 Nm (25.8 lbf ft)
Loctite ®
35 Nm (25.8 lbf ft)
®
Loctite
18 ENGINE
2701
TM
2701
TM
2701
TM
179