Checking The Shift Mechanism - Husqvarna FE 450 2016 Repair Manual

18 ENGINE
-
Check needle bearings
-
Check intermediate clutch discs G) for damage and wear.
-
Check clutch facing discs
-
Check the thickness of clutch facing discs
I
Clutch facing disc - thickness
18.4.35
-
Check shift forks
Shift fork
-
Check shift grooves G) of shift drum @ for wear.
-
Check the seat of the shift drum in grooved ball bearing (D.
220
If there is damage or wear:
-
Change the clutch facing discs and the clutch basket.
41
and collar bushing
If there is damage or wear:
-
Change the needle bearings and collar bushing.
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
CD
for discoloration and scoring.
If there is discoloration or scoring:
-
Change all clutch facing discs.
If the clutch facing disc does not meet specifications:
-
Change all clutch facing discs.

Checking the shift mechanism

--�
e
/\
O G
at leaf
Thickness at leaf
If the measured value does not meet specifications:
-
Change the shift fork.
If the shift groove is worn:
-
Change the shift drum.
If the shift drum is not correctly seated:
-
Change the shift drum and/or the grooved ball bearing.
48
for damage and wear.
CD.
I � 1 .9 mm (� 0.075 in)
for wear.
4.85 ... 4.95 mm (0.1909 ... 0.1949 in)
J
0
304687-10
..