Table of Contents
Advertisement
6.27
Ad"ustin the steerin
-
Remove upper bearing ring
Tool bracket (58429089000)
Pressing tool (58429092000)
-
Press the new bearing ring up to the stop with special
tool Cs).
Tool bracket (58429089000)
Pressing tool (58429091000)
-
Remove lower steering head bearing
-
Remove the seal ring.
-
Grease and mount the new seal ring.
-
Press on the new bearing with a suitable tube as far as it will
go.
D00075-10
Finishing work
-
Install the lower triple clamp.
-
Install front fender.
-
Install the front wheel.
-
Install the headlight mask with the headlight.
-
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
-
Check the play of the steering head bearing.(� p. 41)
-
Remove the motorcycle from the lift stand.
-
Check the headlight setting.
head bearin
Preparatory work
-
Raise the motorcycle with a lift stand.
6 FORK, TRIPLE CLAMP
C,
with special tool fl}.
(a
p. 355)
(�
p. 356)
(�
p. 355)
(a
p. 356)
0-
(0
p. 39)
(a
p. 113)
(a
p. 123)
(a
(�
p. 14)
(�
p. 169)
(a
p. 14)
p. 115)
43
Advertisement
Table of Contents
