17 Tuning The Engine; Checking The Throttle Cable Play; Adjusting The Throttle Cable Play - Husqvarna FE 350 EU 2020 Owner's Manual

17 TUNING THE ENGINE

17.1
17.2
124

Checking the throttle cable play

400192-11

Adjusting the throttle cable play

Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
A
throttle cable .
Throttle cable play
» If the throttle cable play does not meet specifications:
–
Adjust the throttle cable play.
–
Push the cold start button in all the way.
When the throttle grip is turned forward, the cold start but-
ton returns to its original position.
» If the cold start button does not return to its original posi-
tion:
–
Adjust the throttle cable play.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Adjust the throttle cable play.
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 66)
–
Remove the right side cover. (
–
Remove the fuel tank.
–
Check throttle cable routing. (
3 ... 5 mm (0.12 ... 0.2 in)
( p. 124)
( p. 124)
( p. 124)
p. 68)
p. 70)
( p. 75)
p. 84)