Tuning The Engine 16; Checking Throttle Cable Play; Adjusting Throttle Cable Play - Husqvarna FC 350 2020 Owner's Manual

Table of Contents

16.1

Checking throttle cable play

16.2

Adjusting throttle cable play

Info

If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be

removed.

–

Check the throttle grip for smooth operation.

–

Move the handlebar to the straight-ahead position. Turn the

throttle grip back and forth slightly and determine the play in

throttle cable

Throttle cable play

If the throttle cable play does not meet specifications:

–

Adjust throttle cable play.

–

Push the cold start button in all the way.

400192-11

When the throttle grip is turned forward, the cold start but-

ton returns to its original position.

If the cold start button does not return to its original posi-

tion:

–

Adjust throttle cable play.

Danger

Danger of poisoning Exhaust gases are toxic and

inhaling them may result in unconsciousness and

death.

–

Always make sure there is sufficient ventilation

when running the engine.

–

Use effective exhaust extraction when starting or

running the engine in an enclosed space.

–

Start the engine and let it run at idle speed. Move the handle-

bar to and fro over the entire steering range.

The idle speed must not change.

If the idle speed changes:

–

Adjust throttle cable play.

Preparatory work

–

Remove the air filter box cover. (

–

Remove the seat. (

–

Remove the right side cover. (

–

Remove the fuel tank.

–

Check throttle cable routing. (