Tuning The Engine; Checking The Play In The Throttle Cable; Adjusting The Play In The Throttle Cable - Husqvarna FC 250 2016 Owner's Manual

Hide thumbs Also See for FC 250 2016:
Table of Contents

Advertisement

16

TUNING THE ENGINE

16.1

Checking the play in the throttle cable

16.2

Adjusting the play in the throttle cable

Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be removed.
Check the throttle grip for smooth operation.
Move the handlebar to the straight-ahead position. Turn the throttle grip back and
forth slightly and determine the play in throttle cable
Throttle cable play
»
If the throttle cable play does not meet specifications:
Adjust the play in the throttle cable.
Push the cold start button in all the way.
400192-11
When the throttle grip is turned forward, the cold start button returns to its orig-
inal position.
»
If the cold start button does not return to its original position:
Adjust the play in the throttle cable.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and/or death.
Start the engine and let it run idle. Move the handlebar to and fro over the entire
steering range.
The idle speed must not change.
»
If the idle speed changes:
Adjust the play in the throttle cable.
Preparatory work
Remove the right side cover. (
Remove the air filter box cover. (
Remove the seat. (
Remove the fuel tank.
Check the throttle cable routing. (
Main work
Move the handlebar to the straight-ahead position.
Push back sleeve
Loosen nut
Loosen nut
Push cold start button
Turn adjusting screw
when the throttle grip is turned to the front.
Tighten nut
Turn adjusting screw
grip.
Guideline
Throttle cable play
Tighten nut
Slide on sleeve
120354-10
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without
an effective exhaust extraction system.
p. 47)
p. 44)
p. 43)
(
p. 48)
p. 54)
.
. Turn adjusting screw
.
all the way to the stop.
so that the cold start button moves to the basic position
.
so that there is play in the throttle cable at the throttle
.
. Check the throttle grip for smooth operation.
.
3... 5 mm (0.12... 0.2 in)
(
p. 78)
(
p. 78)
(
p. 78)
in as far as possible.
3... 5 mm (0.12... 0.2 in)
78

Advertisement

Table of Contents
loading

This manual is also suitable for:

F2101p1

Table of Contents