Changing The Main Fuse - Husqvarna FS 450 2020 Owner's Manual

Table of Contents

Advertisement

14.4

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
Only use fuses with the required ampere value.
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the seat.
These battery chargers test whether the 12 V bat-
tery retains its voltage. It is also impossible to over-
charge the 12 V battery with these battery chargers.
The charging time may be longer at low temperatures.
These battery chargers are only suitable for lithium
iron phosphate batteries. Read the accompanying
instructions for Husqvarna Motorcycles accessories.
Switch off the battery charger after charging and disconnect
from the 12 V battery.
Finishing work
Install the 12 V battery.
Mount the seat. (
Install the air filter box cover. (
Preparatory work
Press and hold the switch-off button
idling until the engine stops.
Remove the air filter box cover. (
Remove the seat. (
Main work
Pull starter relay
S02323-10
ELECTRICAL SYSTEM 14
Info
1
Never remove cover
.
(
p. 95)
p. 57)
p. 58)
while the engine is
p. 58)
p. 57)
1
from the holder.
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

F2303t0

Table of Contents