RJ-45 board with bracket
Table 6-5
RJ-45 board with bracket description and part number
Description
RJ-45 board with bracket
Before removing the RJ-45 board and bracket, follow these steps:
1.
2.
3.
Disconnect the battery cable from the system board (see
1.
Remove the five Phillips M2.5 × 4.0 screws (1) that secure the assembly to the computer.
2.
Rotate the assembly out of the computer (2).
Reverse this procedure to install the RJ-45 assembly.
32).
32).
Battery on page
44).
Component replacement procedures
Spare part number
L19421-001
51