Omron SMARTSTEP 2 R88M-G Series User Manual page 241

Rotation Speed for Servomotor Rotation Detection
Pn62
Setting range 0 to 20000
 Set the number of rotations for the Servomotor Rotation Speed Detection Output (TGON) during
Internally Set Speed Control.
 The Servomotor Rotation Speed Detection Output (TGON) will turn ON if the Servomotor speed
exceeds the set speed regardless of the direction of rotation.
 There is a hysteresis of 10 r/min, so set a value higher than 10.
Deviation Counter Overflow Level
Pn63
Setting range 0 to 32767
 Set the detection level for the deviation counter overflow alarm.
 The alarm level is the setting value multiplied by 256 pulses.
Deviation Counter Overflow Alarm Disabled
Pn64
Setting range 0 or 1
 The deviation counter overflow alarm can be disabled so that it does not occur.
Explanation of Settings
Setting
0
1
Pn65 Not used. (Do not change setting.)
Unit r/min
Speed
Pn62
Reverse
TGON
Unit × 256 pulses
Unit ---
Explanation
Enabled
Disabled
5-10 User Parameters
Default setting 50
Power OFF → ON
Forward
Pn62
Default setting 100
Power OFF → ON
Default setting 0
Power OFF → ON
Internally set speed
---
Position
---
Position
---
5-56
5