Procedure - Agilent Technologies PSA Series Manual

ESA Functional Tests
Resolution Bandwidth Switching Uncertainty
Figure 4-11 Equipment Setup
Figure 4-12 Equipment Setup

Procedure

The 50 MHz reference output will automatically be switched internally on the
NOTE
E4401B and E4411B or E7401A and will not require any external
connections. All other ESA or EMC analyzers require that the AMPTD REF
OUT be connected to the INPUT to perform this test.
1. Press ,
System Power On/Preset
preset routine to finish. Set the analyzer by pressing the following keys:
,
Input/Output Amptd Ref
,
Input/Output Amptd Ref Out
E4408B) (E7402A, E7403A, E7404A, and E7405A).
Connect a cable from the
(E4402B, E4403B, E4404B, E4405B, E4407B, and E4408B)
E7403A, E7404A, and E7405A).
, 50,
FREQUENCY
, 50,
SPAN kHz
,
AMPLITUDE More
, –20,
AMPLITUDE
,
AMPLITUDE Scale/Div
, , 1,
BW/Avg Res BW
178
, (Factory),
Preset Type
(On) (E4401B and E4411B) (E7401A)
(On) (E4402B, E4403B, E4404B, E4405B, E4407B, and
AMPTD REF OUT
MHz
(75 Ω Input only)
, ,
Y Axis Units dBm
dBm
, 1,
dB
kHz
on the analyzer. Wait for the
Preset
INPUT 50 Ω
to the , as shown in
Figure
Figure 4-11
4-12(E7402A,
Chapter 4