Test Equipment - Agilent Technologies PSA Series Manual

T E
EST QUIPMENT
The table below summarizes the test equipment needed to perform all of the functional
tests. Alternate equipment model numbers are given in case the recommended equipment
is not available.
If neither the recommended nor the alternative test equipment are available, substitute
equipment that meets or exceeds the critical specifications listed.
Analyzer
Item
Adapters
PSA ESA 3.5 mm (f) to 3.5mm (f)
(connector saver for
83630B)
PSA ESA 3.5 mm (f) to N (f)
PSA 2.4 mm (f) to 3.5 mm (m)
PSA BNC (f) to SMA (m)
PSA BNC (m) to SMA (f)
ESA BNC (m) to SMA (f)
PSA ESA Type N (f) to BNC (m)
PSA Type N (f) to N (f)
PSA ESA Type N (m) to 3.5 mm (f)
PSA ESA Type N (m) to 3.5 mm (m)
PSA Type N (m) to BNC (f)
ESA Type N (m) to BNC (f)
Attenuators
PSA 10 dB Step Attenuator
PSA 20 dB Fixed Attenuator
Cables
PSA ESA APC 3.5 mm (1 meter)
ESA APC 3.5 mm
ESA APC 3.5 mm
ESA Type-N, 152-cm (60-in)
ESA APC 3.5 mm
Chapter 2
Critical Specifications
E4446A, E4448A only
Range: 0 to 60 dB
Accuracy: < 0.5 dB
E4407B and E4408B E7405A only
E4407B and E4408B E7405A only
Functional Tests

Test Equipment

Alternate
Recommended
Agilent
Agilent Model
Model
5061-5311
1250-1745
11901D
1250-1200
1250-1700
1250-2015
1250-1534
1250-1472 1250-0777
1250-1744
1250-1743
1250-1476
1250-0780
355D
8491A 8491B
8120-4921
11500E
11500D
11500D
11500E
115