Instrument Messages Without Numbers - Agilent Technologies PSA Series Manual

13753 PSA
Frequency crossing Conducted and Radiated Band is not
supported
Option 239 does not support sweeping across Conducted and Radiated
Bands. Refer to the "EMC Analyzer Guide" for further details.

Instrument Messages Without Numbers

Error Messages Without Numbers
Error
Attempt to change signal data failed.
EMC message, NOT USED
Error
Awaiting valid signal.
This indicates that software enhanced triggering is ON and 5 successive
failures have been detected within a demod measurement
Error
Unable to retrieve signal (remote).
EMC message NOT USED
Error
Unable to uninstall personality, file not deletable.
This message occurs when you try to delete a personality which has been
marked as non-deletable. The personality is marked non-deletable at the
factory. Get in touch with your nearest service center for further
assistance.
Informational Messages
These messages simply provide information; you are not required to do anything.
Information in brackets (such as <directoryname>), is a previously-provided input.
Informational messages appear at the bottom of the screen in the status line.
Informational <directoryname> directory deleted
The directory indicated has been successfully deleted.
Informational <name1> directory renamed to <name2>
<directoryname1> directory renamed to <directoryname2>
Directory name1 has been successfully renamed to directory name2.
Informational <filename> file copied
The filename indicated has been successfully copied.
Informational <filename> file deleted
The filename indicated has been successfully deleted.
Chapter 1
Instrument Messages
Instrument Messages
97